opfflyer.blogg.se - Split 302 block

Oil/additive must contain Zinc designed for use with flat tappet camshafts.

Recommended Valve Springs for OEM heads: Edelbrock part #5822 non-rotator/# 5922 Rotator In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs.

For more information, visit Installation Notes WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. 472" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 16"

Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift. Not for 1985 and later engines with roller lifters. This cam produced 310HP and 260 Ft Lbs of Torque when paired with Performer 289 intake manifold #2121 and Performer cylinder heads #60329. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. You can expect a major improvement in throttle response and torque. The Performer-Plus #2122 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. Edelbrock Performer-Plus Camshaft #2122 is designed for 289-302 Ford V8 engines and produces optimum torque from the low-end to the mid-range.